How do you know if the hearing aid is normal?

So how do you judge whether a child’s hearing aid is working properly?

1Turn off one of the ear hearing aids (to distinguish which hearing aid is the problem);

2Remove the battery and check if the battery is fully charged with the tester. If the battery is consumed much faster than usual, it may be a battery problem, or it may be a problem with the hearing aid itself. It needs to be sent for inspection. If the battery is sufficient, there is no sound or the sound is very small. It is possible that the microphone is clogged or damp (check if the microphone port is clogged, clean it with a small brush and dry it).

3Observe the condition of the ear mold and the sound tube of the hearing aid (whether there is aging or damage, and this part of the problem usually causes howling);

4If the ear mold and the sound tube are blocked, use a suitable tool to remove the blockage;5Check the battery compartment and battery pole pieces for poor contact and rust;

6Bring the monitor earphones and connect one end of the earphones with the ear molds; turn on the hearing aids, if there is a howling sound, the connection is not tight enough, please adjust to the state without whistling;

7The hearing aid is placed close to the tester’s lips about a punch distance. In a quiet environment, the volume and sound quality of the hearing aid are detected using “Lin’s Six Tone”; (If the hearing aid is silent during the test, the battery may be insufficient. , try a new battery, if there is still no sound, it is usually a hearing aid problem, need to be repaired)

8The same method began to test the child hearing aid on the other side.

Schedule appointment

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

Steven Jackson

Vestibulum ante ipsum

Vestibulum ac diam sit amet quam vehicula elementum sed sit amet dui. Donec rutrum congue leo eget malesuada vestibulum.

Learn more about us

Leave A Comment